トップページ - 製品 - 自動車診断ツール - 新バージョン 4.88V Digiprog III Digiprog3 Odometer Master Programmer Entire Kit
« 戻る

新バージョン 4.88V Digiprog III Digiprog3 Odometer Master Programmer Entire Kit

商品番号 SM33-E
在庫切れ
市場価格:28,900 円
現価:26,900 円 節約 ¥2,000.00
運送:
   エクスプレス配送サービス 
配送時間:3-5営業日.詳細»
重量:
4.50KG
規格:
42cm*24cm*19cm      ( Inch:16.54*9.45*7.48 )
返品:
7日以内に返品できますが、ただお客様は運賃を払います。詳細»
関連なファイルをダウンロードする。:
  digiprog-3-vehicule-liste-jobd2.pdf  (1,094.3K)
Newest version V4.88 digiprog3 newly release, this new version add more car models on the basic of V4.88. Digiprog3 is a cost-effective mileage correction tool, it support multi-language and full range or vehicle.
Newest V4.88 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit

Software Version: V4.88
Supported Languages:
English, Spanish, French, Portuguese, Italian, Turkish,  Dutch

Newest V4.88 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit

DigiProg is the worldwide leader in the production and marketing of digital speedo programming and correction software. Our state of the art techniques are continuously kept up to date and our quality standards are second to none, experts in vehicle techniques, EDP machine control as well as our measurement technology has years of experience in the field of digital vehicle engineering and constantly strive to stay ahead of the competition in there field of expertise.

Newest version: V4.88

V4.88 Version Newly added vehicles:


Citroen: C3/DS3 new versions 
Dodge: Charger 24C16 
VW: Diag new version 
Fiat:
Fiorino 95080/ECU95320 
Ducato/Punto 95160 
Landrover:
Evoque 93C76 
Mazda: 
3 C66 
Mercedes:
Crafter/Sprinter EZS new versions 
Mitsubishi:
Lancer new version 
Nissan:
Qashqai 2011 HCS12 
370Z C86 
Renault:
Scenic 24c16+ABS

Supported Languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkey, Nederlands.

Digiprog 3 Menu:

1. EEPROM menu


The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.

2. CAR/TRUCK menu

This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.

3. Motorcycle Menu

This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.

4. Special Functions Menu

The special functions menu is for use only by official DigiProg dealers.

5. Setup Menu

This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles.

Digiprog 3 Other Features: 
 
Service interval adjustments and settings
Assyst processing
Fault memory read-erase
EEPROM programmer
Integrated PC communication

Using the EEPROM menu

On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started.

The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.

Finally some important tips for using Digiprog 3:

Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned completely as the solvent can damage the clips.

Other features: 

Service interval adjustments and settings
Assyst processing
Fault memory read-erase
EEPROM programmer
Integrated PC communication

DIGIPROG 3 Screen Picture Display:
digiprog 3 V4.85 software display 1

digiprog 3 V4.85 software display 2

 
スマホでQRコードをスキャンして、いつでも何処でも注文できる!

 
お問い合わせ
何か質問があれば、 お気軽にお知らせください。
Live Support:
オンラインチャット
E-Mail:sales@jobd2.jp
Skype:JOBD2.jp

ご注意ください:
製品を安全に送るために、電話番号が必要です。ご注文する時、電話番号を教えてください。
また、製品が無事に保証するため、パッケージに署名する前に、損傷があるかどうかを二重にチェックしてください。
もし、商品は損傷があれば、損傷を受けた証拠を開いてください。
Attention: please leave your telephone number for shipping arrival when you make payment for this product on our website.
レビューを書く
* 評価:
    レーティングを選択する。
* ラストネーム:
* お客様のE - Mailアドレス:
* 詳細を確認する:
本製品についての評価を教えて、経験を分かち合ってください。この製品だけに、意見を発表したことを確認してください。2日以内ですべての評価をに審査します。不適切な評価を削除する。
アフターサービスについて: Contact our Customer Service Department. (サービスの担当者はすぐに対応する。)
てください。ログイン first if you want to later edit or manage reviews uploaded by yourself.
気に入るかもしれない ...
49%
ST59 Plug for DIGIPROG3 Used for NEC Cluster Vehicles
3,091 円
ブックマークに

JOBD2.jp

×